Product Quicklinks Call us at 800.873.8731
Dynapar_logo-Nov-11-2021-09-30-18-62-PM

Posts by Topic

Recent Posts

What is Wrong With the My HS35iQ Feedback Control Loop?

Why is My HS35iQ Drive Counting in the Wrong Direction?

What Should the PPR be Set to on my Programmable Unit?

Why is the Temperature LED Red?

Why is the Cable Fault LED Red?

Why is the cable fault LED red with a verified connection?

Why does the coupling slip LED trip during rapid speed changes?

Why is the LED indicator green during a known fault?

Why won't PulseIQ Software open?

Why am I unable to connect to PulseIQ Software?

How Should Users Connect the Fault Output From a HS35iQ to a PLC?

What are the Advantages of a Bearingless Encoder?

What are the Benefits of Hubshaft Encoders?

What are the Benefits of Shafted Encoders?

What is a Hollowshaft Encoder?

What are the Encoder Mounting Options?

When Should You Use a Coupling to Mount Encoders?

What is a Single- Ended Output?

How Do Reflective Encoders Produce a Signal?

How Do Magnetic Encoders Produce a Signal?

How Does an Optical Encoder Produce a Signal?

What Are Indications of Good Encoder Output?

Where do I Connect The Oscilloscope Leads?

How Do I Use an Encoder and Measuring Wheel on a Conveyor System?

What Should I Consider When Installing an Encoder Tether?

Why are Tethers Important for Encoders?

What is an Encoder Tether?

What Are Dynapar Phenolic Measuring Wheels Made Of?

How Many Shaft Positions Exist on Absolute Encoders?

How to Calculate Frequency Response?

What Should I Consider When Converting DC Tachometers to Encoders?

What Are Critical Aspects to Specifying Resolvers?

How Can I Reduce Jitter On My HD15 Display?

What is a Sinking or Sourcing Input?

How Do I Convert Gray Code to Binary?

What is Gray Code?

What is the Advantage of Absolute Encoders?

Is Shielded Cable Required?

What is a Zero Speed Sensor?

What is the Maximum Length of Cable I Can Use on a Dynapar Encoder?

How Do I Choose the Pulses Per Revolution (PPR)?

What is the Difference Between Quadrature and x4 Logic?

What is the Purpose of the A not and B not Channels?

What Are Benefits and Key Features of the NexGen RT8 Encoder?

Can I Return My Sensor/Wheel Inventory From an Obsolete Encoder?

Can Old Sensors/Wheels Be Applied to the NexGen (RT8) Encoder?

Why Can I Not Find The RIM Tach 8500 (R8) on Your Website?

What is the Difference Between Resolvers and Encoders?

What is Important for Encoders in Food and Beverage Applications?

What Equipment Is Used To Troubleshoot Encoders?

Why Do I Need a Pull-Up Resistor?

What is a Quadrature Output?

What is a Push-Pull Output?

What is a Totem Pole Output?

What is an Open Collector Output?

What is a Differential Line Driver Output?

What is the Difference Between Single-Ended and Differential Signals?

What is the Most Common Cause of Encoder Failure?

Can a Dual Output Encoder Have Two Different PPRs?

How Do I Get My Encoder To Count In The Opposite Direction?

Can I Use an Anodized Aluminum Encoder in Corrosive Environments?

When Should I Use a Stainless Steel Encoder?

What is the Difference in Single and Dual Output Encoders?

How do Unidirectional and Bidirectional Encoders Differ?

What is an Encoder Index Pulse?

Can an Additional Sensor Module be Added to an Existing RIM Tach® NexGen Series?

How Far Away Can My Encoder be From the Drive?

Should I Connect My Case Ground?

How Quickly Can Your Absolute Encoder Report its Position?

All posts

Looking for a custom solution?

Tell us about your requirements and our application engineers will help find the right solution today
bofu-image.png

Products & Solutions

Rotary Encoders

Resolvers

Condition Monitoring System

Spare Parts and Accessories

 

 

Knowledge Center

Contact Us

© Copyright Dynapar 2024 All Rights Reserved

Privacy Notice | Cookie Policy | Tariff Surcharge Notice | Site Map | Terms and Conditions