Cut costs and boost productivity with a condition monitoring tool designed for ease of use and scalability. The Dynapar OnSite™ condition monitoring system is a hardware and software solution that combines flexibility with fast results. The hardware hub collects vibration, temperature and speed (with an encoder present) and transmits it via a Wi-Fi or Cellular network. Setup in minutes by attaching the sensors, turn on the power and the Dynapar OnSite™ System does the rest. Built-in software tools allow alarms to be set and real-time data to be analyzed.
Built-in software tools reside in the cloud allowing for anyone, vibration expert or novice to run advanced analysis without installing expensive software. Access your data from anywhere from your mobile device and receive alerts via text or email when running conditions change or trigger alarms.
Customizable alarms based on user established thresholds for RMS, FFT Frequency, Dynamic FFT orders, Peak G’s, Speed, Temperature, Missed Post and Local Data Request.
Peak threshold filter can also filter out impact noise to prevent impact noise from triggering alarms.
Operating Temperature Range (Sensor) | -40°C to 105°C |
Operating Temperature Range (Hub) |
0°C to 40°C or -20°C to 80°C (depending on model) |
Frequency Bandwidth |
0 Hz - 1,000 Hz |
Measurement Range (programmable) |
Low Mesurement Range Sensor:
High Mesurement Range Sensor: +/- 40g (Range: 10, 20, 40g) |
Sensitivity | 15.6 μg/LSB |
Spectra Line | Programable (24K max) |
Sampling Frequency | 4000 Hz |
Temperature Sensor | Yes |
Max Number of Hubs | 255 |
Frequency Accuracy | +/- 1 Hz |
Low-pass Antialiasing Filter | 1.5 kHz |
Low-pass Digital Filter | 1 kHz |
High-pass Filter | DC - 10 Hz Programmable |