SeRIES HSD35
  

Magcoder HS35M

 MagCoder HS35M
RIM Tach 1250
 

Quick Specs...

  • Fits a wide variety of shaft types and sizes
  • Fast, easy, flexible mounting
  • Reliable magnetoresistive sensor technology
  • 128 - 1024 PPR available
  • Reverse polarity protected
  • Short-circuit protected

    Replaced by HSD35


 

Printer-friendly Version

Dimensional Diagrams

 

 

Overview Industry/Application Specifications Related Info  

Overview / Design Principle:

The shaft mounted MagCoder HS35M incorporates magnetoresistive technology making it immune to common contaminants such as grease, oil, water, and dirt. It fits a wide variety of motor shaft sizes and is a perfect choice for use in applications requiring accurate velocity feedback.

Its short circuit protection and reverse polarity protection prevent common causes of encoder failure. The MagCoder HS35M offers a variety of output voltage options, including the choice of regulated output, making it compatible with devices that accept only a specified voltage. An optional high powered line driver is available for further assurance of clear signals over long cable lengths. This unique driver is the strongest offered in the encoder industry.

The entire MagCoder HS35M rides on large motor style bearings, maximizing its operational life. Its flexible design allows the encoder to move axially, radially, and at a tangent. It is toughly constructed of stainless steel and epoxy coated zinc alloy. The simple design of the HS35M is pre-aligned, does not require user adjustments, and mounts without accessory hardware, further reducing installation cost and time.


Features and Benefits:

  • Short circuit protection and reverse polarity protection
  • 5-26 VDC operation with bi-directional quadrature and with high power differential line driver outputs
  • 128, 256, 512, & 1024 pulses per revolution (PPR) with optional Index pulse
  • Up to 80°C operational temperature

Applications:

The MagCoder HS35M hollow shaft digital encoder is ideal for motor and machine applications at resolutions to 1024 PPR. Flexible mounting and adjustable anti-rotation arm, provide high tolerance of shaft vibration.

Standard Operating Characteristics
Code: Incremental
Pulses per Revolution: 128-1024
Phasing Sense: A leads B for Counter-Clockwise rotation (CCW) viewing encoder-mounted end
Quadrature Phasing: 90° ± 22°
Symmetry: 180° ± 54°
Index: 270° gated to falling B edge

Electrical
Input Voltage Requirement: 5-26 Volts DC
Current Requirement: 45 mA typical plus line driver load
Output Signals: With Elec Option 0: 5-26 V Line Driver, 40mA
With Elec Option 1: 5 V Line Driver, 40mA
With Elec Option 2: 5-26 V Line Driver, 100mA
Frequency Response: 0 - 120kHz Data & Index
Electrical Immunity: 2kV ESD, Reverse Polarity, Short Circuit
Connector: 10 pin industrial duty latching, sealed NEMA 4 &12, IP65; or MS connector; or 18” pigtail

Mechanical
Shaft Speed: 3,600 RPM
Mounting Configuration: Flexible mount with anti-rotation arm
Housing Material: Stainless steel and epoxy coated zinc alloy
Acceleration Rate: 12,000 rpm/sec max
Available Shaft Sizes: 6 mm to 1.25” thru-shaft style available. See ordering table for sizes.
Allowable Shaft End-Play: ± 0.15”
Allowable Shaft Runout: 0.015” TIR (Subject to RPM Limitation)

Environmental
Operating Temperature Range: -20°C to +80°C
Storage Temperature Range: -40°C to +120°C
Humidity: to 98% RH (non-condensing)
Shock: 50 Gs for 11 ms
Vibration: 18 Gs @ 5-2000 Hz spectrum

Available Specifications:

Related Products & Resources: