Visit Dynapar at OTC 2015 in Houston TX May 4-7, 2015

OTC-conference-logo2

OTC 2015
Booth# 5527
Houston, TX
May 4th - 7th 2015


Thank you to our guests that visited Dynapar at the Offshore Technology Conference in Houson, TX May 4-7, 2015 at booth # 5527! See our latest rotary encoders specifically designed for the extreme environments of land and offshore drilling rigs and equipment below. New products for 2015 include our new triple certified EN series incremental encoders ideal for applications including drilling motors, top drives, block position, pipe handling, iron roughnecks, coil tubing units and more. We also exhibited our U.S. / Canadian ATEX and IECEx certified AX series absolute encoder ideal for explosion proof applications. See all of our oil & gas encoder offerings


2015-OTC-Dynapar-Booth-Web


Featured products at the show include:


EN42-170x170

EN42 – Triple Certified Heavy Duty Incremental Encoder

The shafted EN42 encoder offers encapsulated electronics for ATEX Zone 1 and Zone 2 environments. Unique design eliminates the need for I.S. barriers. Temperature ranging from -50 to 100 °C. Ideal for drilling motor applications.

EN44-170x170EN44 – Triple Certified Extreme Heavy Duty Rotary Encoder

The explosion proof EN44 features encapsulated electronics safe for Zone 1 and a hub-shaft with an isolated coupling to compensate for motor shaft run out and endplay. Design eliminates the need for I.S. barriers reducing installation cost and system complexity.

AX-73-170x170

AX7 Series – Optical Encoder

The AX7 series optical encoders are now U.S. / Canadian ATEX and IECEx triple certified for hazardous and explosion proof applications. Multiple product configurations are available with stainless steel or aluminum housing.

AX65-170x170AX65 Series – Magnetic Encoder

The AX65 heavy duty magnetic encoders offer extreme shock and vibration resistance, protection class up to IP66/IP67 and ATEX and IECEx certification for explosion proof requirements. A high grade stainless steel housing provides extreme corrosion resistance.

DWD38-170x170DWD38 – Draw Works Optical Encoder

The DWD38 draw works threaded shaft with adapters that can be replaced in the field for reduced downtime. Optional redundant dual isolated outputs are available.

HSD-35-D2-170x170

HSD35 D2 – Class 1 Div 2 Rated Encoder

A variation of our HSD35, the HSD35 D2 features a Class 1 Div 2 hazardous area rating and is available with dual isolated outputs.

ar62-170x170AR62 – DNV certified encoder

The DNV certified AR62 absolute encoder features over-sized bearings tripling the life over standard absolutes, a wide temperature range of -40 to 100 °C and is available with an IP69k submersible rating.